158 products were found matching your search for Mic placement in 4 shops:

This variation of the MS7311B features a U-shaped base instead of the heavy tripod design, allowing for placement in the tightest of spaces. Featur...

Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications. The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments. The acoustic response of the d:screet 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone. The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc. d:screet 4061 Miniature Omnidirectional Microphone, High SPL This microphone is acoustically identical to the d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs). The d:screet 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices. In comparison, the d:screet 4061 is about 10 dB less sensitive than the d:screet 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone). This mic is available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available. A bit about omnis An omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live...

The Point Source Audio Placement Control Beige Clip is designed to uses for Headset Style Microphones. This clip is comes in set of 4 pack.

The Latin Percussion Mic Claw ensures solid placement of mics on snares, toms & congas.

Ensures solid placement of mics on snares, toms & congas. 3/8 diameter Z-Rod allows close or extended positioning Rubber lined jaw/mount i...

Ensures solid placement of mics on snares, toms & congas 3/8 diameter Z-Rod allows close or extended positioning Rubber lined jaw/mount i...

A heavy, solid-metal tripod base gives our MS7311B Drum/Amp Mic Stand the stability of larger models, while its compact size permits easy placement...

A heavy, solid-metal tripod base gives our MS7311B Drum/Amp Mic Stand the stability of larger models, while its compact size permits easy placement...

Tired of inconsistent placement of drum mics night after night? Are you looking to free up some space in your setup? The EZ Mount Cymbal/Snare Mic ...

Provides flexible placement options for three mic pods Reduces cross-table cabling. Connects both mic pods and additional hubs. Place or move mic pods for best performance and easy reach.

The innovative clutch on our DS300B Posi-Lok Desktop Mic Stand enables locking placement of the boom at a variety of angles and features an ergonom...

The Sennheiser MKE1 Ultra-Miniature Lavalier Microphone with 3.5mm Capsule & 3-Pin Connector (White) is their smallest, professional lavalier microphone to date. Measuring just 3.3mm (0.12") in diameter, the MKE1 is well suited for placement in hair, the body, clothing, accessories, props, etc. Audio signal is reproduced transparently, while maximum intelligibility of speech and vocals is achieved with its omnidirectional polar pattern and wide frequency response. The Kevlar reinforced cable is rugged and minimizes surface noise. The MKE1's moisture resistant enclosure protects against damage caused by moisture, making it well suited for actors, performers and broadcast applications.

How the d:screet Core 4061 Miniature Omnidirectional Microphone revolutionizes audio recording is truly remarkable. This high-quality, durable microphone, developed by the reputable DPA Microphones, is designed to cater to specific applications based on sensitivity, voltage, and placement needs. Built on the foundation of the original d:screet 4060, the first miniature microphone by DPA, the 4061 series incorporates the best technology previously exclusive to hearing aids and measurement microphones. Each microphone in this series shares essential features, but each is optimized for different applications, making it a versatile choice for audio professionals.The d:screet Core 4061 is engineered to endure the harshest conditions. It features a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. Its innovative Double Vent Protection System enhances the microphone's resistance to humidity and sweat, making it a reliable choice for demanding environments.Designed with a Kevlar-reinforced cable relief, this microphone can withstand constant twists, bends, and pulls, a testament to its durability. The acoustic response of the d:screet 4061 series can be modified by selecting the appropriate grid for the task, with two grids supplied with each microphone.The d:screet 4061 Miniature Omnidirectional Microphone, High SPL, is acoustically identical to the d:screet 4060, but its sensitivity is adjusted to handle higher sound pressure levels (SPLs). It can handle SPL up to 144 dB peak before clipping, making it ideal for recording very loud sound sources, such as certain instruments and human voices.This microphone is about 10 dB less sensitive than the d:screet 4060, making it perfect for hidden applications, such as being mounted on the head or forehead of a theater performer. Available in four colors: black, brown, beige, and white, it seamlessly blends into various settings.The omnidirectional nature of this microphone means it has sensitivity at all angles, picking up sound equally from all directions. This results in extremely natural and realistic sound, making it an excellent choice for capturing ambient sounds or miking a large sound source such as a choir.All of DPA's microphones, including the d:screet 4061, can be configured to run effortlessly with a wireless system, thanks to their unique MicroDot termination and changeable adapter. This ensures secure configuration and compatibility with numerous professional wireless systems, offering flexibility and affordability. Hardwired versions without the MicroDot connector are also available for various versions. In conclusion, the d:screet Core 4061 Miniature Omnidirectional Microphone with Hardwired TA4F/Mini XLR Connector, Loud SPL, Low-Sens, Beige, is a testament to DPA's commitment to producing innovative, high-quality audio equipment.

The d:fine omnidirectional single-ear headset microphone offers accurate, natural voice intelligibility and very high SPL handling making it the perfect choice for use in broadcast, live and conference applications. Users can adjust the d:fine for left or right ear placement by simply rotating the boom on the single-ear hook. The d:fine mic comes with boom, cable and accessories like foam windscreens and make-up cover.

Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications. The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments. The acoustic response of the d:screet 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone. The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc. d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL This microphone is small in size, but mighty in flexibility. Due to its miniature size, it exhibits an exceptionally accurate omnidirectional pattern and therefore does not need to be aimed directly at the sound source to achieve quality pickup. The omnidirectional pattern also makes it less sensitive to handling noise as well as pop and wind noise. We originally designed this microphone for use with wireless systems in theaters but today it is one of the most loved mics for television and film applications as well. It is especially suited for capturing speech in all of its nuances and can be used to close-mike a wide range of instruments. This microphone handles sound pressure levels up to 134 dB before clipping occurs. This mic is well suited for applications where the sound source is more remote or damped and you need to have a good balance signal versus noise. The d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL is available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available. A bit about omnis An omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking...

For professionals seeking a reliable and efficient solution for their microphone placement needs, the Voice Technologies Miniature Magnet Clip is an ideal choice. Specifically engineered for VT401, VT401HS, and VT403 microphones, this compact and stylish accessory ensures seamless compatibility and effortless usage. Constructed with high-quality materials, this durable magnet clip is designed to withstand the rigors of daily use, making it a long-lasting addition to your audio equipment. Its versatile design allows it to securely attach your microphone to a variety of surfaces, including clothing, ensuring optimal sound capture in a range of settings. Whether you're a seasoned professional or an amateur enthusiast, the Voice Technologies Miniature Magnet Clip enhances your audio recording experience by providing a secure and convenient microphone placement solution. This beige magnet clip not only offers functionality but also adds a touch of elegance to your audio gear. Remember, when it comes to superior sound quality, every detail matters. Trust in the Voice Technologies Miniature Magnet Clip to deliver consistent performance and ease of use for your VT401, VT401HS, and VT403 microphones.

Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications. The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments. The acoustic response of the d:screet 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone. The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc. d:screet 4061 Miniature Omnidirectional Microphone, High SPL This microphone is acoustically identical to the d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs). The d:screet 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices. In comparison, the d:screet 4061 is about 10 dB less sensitive than the d:screet 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone). This mic is available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available. A bit about omnis An omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live...

After extensive research and development, Adorama presents the d:fine 4066 Classic Omnidirectional Headset Microphone. This versatile, miniature microphone solution is designed with a unique dual-ear mounting system, offering flexibility for both left and right ear placement. The 4066's innovative design also allows for easy color change, making it adaptable to various aesthetic requirements.The d:fine 4066 is not just about aesthetics, it also delivers exceptional sound quality. Its clean and transparent sound output, coupled with ample headroom, ensures optimal audio performance. The microphone's sensitivity is calibrated at 6 mV/Pa, perfectly matching the level of the human voice to the general input sensitivity of most wireless transmitters. When powered correctly, this microphone can handle sound pressure levels up to 144 dB SPL before any clipping occurs.One of the standout features of the d:fine 4066 is its MMB4066 Miniature Microphone Boom. This omnidirectional microphone boom can be used separately, making it an ideal choice for applications where the headset is not required.Understanding the challenges of theatrical applications, the d:fine 4066 is designed with a double vent protection system and a drop stopper on the microphone boom. These features, along with the use of water-resistant materials inside the microphone, make it highly resistant to humidity-related failures.The d:fine 4066's headset surface is matte gold plated, and the earhooks are covered with a silicone hose for added comfort. With a wide range of connection adapters, this microphone is compatible with most professional wireless systems, as well as a 48 V phantom XLR connection.Available in three colors (black, beige, brown) and three sizes (small, medium, large), the d:fine 4066 Classic Omnidirectional Headset Microphone is the preferred choice for theaters on Broadway and West End. Experience the superior sound quality and flexible design of the d:fine 4066, a testament to Adorama's commitment to delivering top-tier audio equipment.

Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications. The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments. The acoustic response of the d:screet 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone. The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc. d:screet 4061 Miniature Omnidirectional Microphone, High SPL This microphone is acoustically identical to the d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs). The d:screet 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices. In comparison, the d:screet 4061 is about 10 dB less sensitive than the d:screet 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone). This mic is available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available. A bit about omnis An omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live...

Each version is tailored towards a specific application based on sensitivity, voltage and placement needs. They are all based on the original d:screet 4060; the very first miniature microphone developed by DPA from the best technology previously only used in hearing aids and measurement microphones. All of the mics in the series share important basic features, but each is optimized for particular applications. The series was developed to withstand the toughest of conditions. They contain a 5.4 mm diameter pre-polarized condenser element with a vertical diaphragm. This unique, Double Vent Protection System makes the mics greatly resistant to humidity and sweat. These mics are also designed with a Kevlar-reinforced cable relief, which is built to withstand the constant twists, bends and pulls that are part of the everyday use in harsh environments. The acoustic response of the d:screet 4060 Series can be modified by selecting the correct grid for the job. Two grids are supplied with each microphone. The pre-fitted Soft Boost Grid gives a 3 dB soft boost at 8-20 kHz. It should be used when the microphone is mounted on the performer's head as well as in most other applications where you need a natural-sounding microphone. When fitted, the High Boost Grid introduces a 10 dB soft boost around 12 kHz for applications where the microphones chest-placement is preferred. Both of these grids are made of anodized stainless steel, giving a tough and scratch resistant surface. They can be detached from the microphone and cleaned of sweat, makeup, etc. d:screet 4061 Miniature Omnidirectional Microphone, High SPL This microphone is acoustically identical to the d:screet 4060 Miniature Omnidirectional Microphone, Normal SPL, but its sensitivity is adjusted to accommodate higher sound pressure levels (SPLs). The d:screet 4061 Miniature Omnidirectional Microphone, High SPL can handle SPL up to 144 dB peak before clipping, making it one of the best miniatures for use on very loud sound sources, such as some instruments and human voices. In comparison, the d:screet 4061 is about 10 dB less sensitive than the d:screet 4060 and therefore works well when used for hidden applications, for example mounted on the head or forehead of a theater performer. In this placement, the sound pressure level is about 10 dB louder than what you encounter with chest placement (lapel microphone). This mic is available in four colors: black, brown, beige and white. An even more robust, heavy-duty version is also available. A bit about omnis An omnidirectional microphone has sensitivity at all angles - in principle picking up sound equally from all directions. This gives you extremely natural and realistic sound compared to a cardioid mic. Omni mics are often used for picking up ambient sounds, as well as miking a large sound source such as a choir in a recording situation. Unfortunately, due to their pickup pattern, omnis can also produce a lot of feedback in live...